Flowway Teknik Pvt. Ltd.
Flowway Teknik Pvt. Ltd.

WEBSITE USER TERMS & CONDITION

  1. The content of the website are provided to you and operated by:
    1. FLOWWAY TEKNIK: Flowway Teknik Pvt. Ltd. , with CIN No. U29309GJ2019PTC111620, at address: Plot no. 1504, phase-III, Vatva -GIDC, Ahmedabad-382445, Gujarat, India. Tel. Phone: +91-79-40083041, E-mail: info@flowwayindia.com
    2. By using Flowway website and/or using any software tools and/or apps made available thru the Flowway website, you (the ‘’user’’) acknowledge that these terms of use apply and that access is granted to the user under the condition that all the provision to these terms of use are complied with and are accepted by the user.
    3. The Flowway website offers general information about the company, its product and its services. It is intended as a preliminary guide only, and does not substitute professional advice and independent, case-specific verification of facts prior to taking decision.
    4. All information and contents (including but not limited to recommendation, advice, specification, data sheet, brochures, images)published on Flowway website, is provided ‘’as is’’ and ‘’as available’’ without any representation or warranty of any kind(whether express or implied), including but not limited to warranties of correctness, completeness, accuracy, fitness for a particular purpose or non-infringement of any third party rights. Us of the Flowway website, as well as its information and contents, is at the user’s own risk. Any information and content contained herein may be changed or deleted by Flowway at any time without any notification, the user should not rely on the available of the Flowway website or any part thereof.
    5. To the maximum extent permitted by applicable law, Flowway and its affiliates shall not be liable for loss or damage of any kind (including but not limited to loss of profit, loss of use, loss of data or information, or direct, indirect, incidental orconsequential damages) suffered by the user or any other part in connection with or arising out of the use of or access to Flowwa’s website, or information or content contained therin regardless of the factual grounds or legal basis of such loss or damages, including but not limited to contract, tort(including negligence), indemnity, warranty, strict liability or otherwise.
    6. Flowway does not warrant that the Flowway website runs flawlessly and flowway accept no liabilities for any interference with the user’s IT system through viruses , hackers or malware of any type.
    7. It is prohibited, in particular to use tools designed to systematically and automatically copy, reproduce, broadcast, or otherwise transmit Flowway website content. Flowway Explicitly reserve the right to take action against the responsible parties, namely to claim compensation of damages.
    8. The Flowway website may contain links to other website and resources of third parties, which are beyond the controls of Flowway. Flowway assumes no responsibilities for the suitability, accuracy, completeness, adequacy, legality, or otherwise of the contents of such websites or for any offers and services contained therein. The use of such websites and resources is at the user’s own risk.
    9. The processing of personal data you submit and that we collect, and the procedure we apply for the analysing the use of the Flowway website, are further described in the separate privacy policy.
      Client: Any physical or legal person who acquires products or uses services provided by FLOWWAY
      Orders of standard products: Orders that refer to FLOWWAY’s products that appear in catalogues, the website, intranet or flyers, and do not require any additional process in manufacture or assembly.
      Orders of non-standard products or especial manufactures: Orders that refer to FLOWWAY products that require some additional or especial process in manufacture or assembly, a specific requirement written out by the Client.
      Additional costs: All costs that derive from concepts different than the basic price of the product, and that are originated as a consequence of the Client’s order, such as: kits, units by package, especial labelling, non-standard packaging, or any other properly accredited concepts.
  2. RANGE OF APPLICATION AND VALIDITY.
    1. All sales and provision of products and/or services offered FLOWWAY are to be regulated by the present general Sale conditions (from here on out, the ‘Conditions’), with the exception of those particular conditions that can be agreed upon with each Client during the pertinent offer or the acceptance of the order.
    2. The present Conditions will be considered as accepted by the Client from the moment the Client is expressly informed of their existence, either through FLOWWAY’s website or through the offer or order themselves.
    3. The present General Condition will remain applicable until the finalization of the contract between both parts and the fulfilment of all the obligations each assumed. These conditions can be modified; and it is the Client’s responsibility to consult them periodically, especially when They are about to place an order, given the valid Conditions at the time will be the ones applicable.
      FLOWWAY TEKNIK: Flowway Teknik Pvt. Ltd. , with CIN No. U29309GJ2019PTC111620, at address: Plot no. 1504, phase-III, Vatva -GIDC, Ahmedabad-382445, Gujarat, India. Tel. Phone: +91-79-40083041
      E-mail: info@flowwayindia.com
    4. Failure to include the clauses of the general conditions or the declaration of nullity of any of them in the order will not determine total inefficiency of the contract. The contract can therefore subsist without the disposition being declared null.
    5. All conditions suggested by the Client that differ with the present ones, and which have not been explicitly accepted in writing by FLOWWAY, will lack efficiency and will not be binding.
    6. Documents emitted by FLOWWAY different from the present Conditions, such as: flyers, catalogues, budgets, technical specifications, drawings, etc., have a merely informative value and FLOWWAY reserves the right to modify them at any moment, without damaging the particular conditions agreed upon with their Clients.
  3. ORDERS.
    1. The Client can place an order through any means offered by FLOWWAY, including, for example, but not exclusively, email address, phone, sale portals owned by the Client themselves, chat, a Client-provided extranet, shops’ windows, etc.
    2. When placing an order, the Client must explain in as much detail as possible, not only the number of units and the delivery address, but also the product or service ordered from FLOWWAY just like it appears in the Catalogues, website, offers or consults.
    3. When placing an order, the Client is informed of the price of the product or service requested as well as the delivery costs. This means the Client commits, from the moment they accept the offer, to receive the product or services acquired and to pay the agreed amount, including, if it is the case, the delivery costs, without taking into account what is going to be described about the possibility of cancellation in the next general condition.
    4. In the orders of non-standard or especial manufacture products, the Client will provide a detailed plan, and will also pay, in case it is required, for the equipment before the production is started.
    5. Offers, plans, designs, assemblies and any other documentation pertinent to the order that FLOWWAY uses are of exclusive property of the company as a result of their knowledge, as indicated in the general condition number 15 in the present Conditions. Therefore, the Client must not share them with any third parties without the express written consent of FLOWWAY.
    6. The order will only include the equipment and materials detailed in the offer or budget expressly accepted by the Client.
    7. There is a minimal import per order of 20 USD. In case the import of the order is below the minimum, the minimum will still be invoiced.
  4. CANCELLATIONS AND MODIFICATIONS TO THE ORDERS.
    1. Non-standard or especial manufacture orders cannot be cancelled once they have been already accepted by FLOWWAY.
    2. In order to cancel standard product orders already accepted by FLOWWAY, a written consent will be needed. All cancellations of standard product orders already accepted by FLOWWAY will entail an additional 10% payment of the total import budgeted for the handling costs. Additionally, if the cancellation entails any damage or harm, FLOWWAY can demand that the Client pay for them.
    3. FLOWWAY will only accept modifications and/or variation in design, reach, time periods and other terms of an order as long as these changes are notified by the Client in writing and with the appropriate notice. In the case that the aforementioned modifications and/or variations come to impose additional or more onerous obligations onto FLOWWAY, the company has the right to make equitable adjustments to the contract terms, both economically and in the delivery time period.
  5. DELIVERY.
    1. FLOWWAY makes the commitment to meet the delivery time periods agreed upon with the Client. However, all delivery periods appearing in any of FLOWWAY’s documents are merely a guideline; they may be modified due to production causes, a delay in subcontracting, etc. The Client is fully aware of these circumstances and expressly accepts them. Therefore, any delays that may occur in the delivery of products will not entail the decision to finalize the contract, nor any compensation or penalisation of any kind.
    2. The Client accepts the posting of partial batches of products when circumstances of service, production or storage require so.
    3. In the case that additional costs are originated as a consequence of any kind of order, these will be stated in the offer, budget, or order. Also, the aforementioned additional costs are the responsibility of the Client, who will have to pay for them as well as for the import of the supplied products.
    4. FLOWWAY G reserves the right to deliver orders that correspond only to conditioned units in multiple or pertaining to packaged batches which have an admissible packaging tolerance of more or less 2%. FLOWWAY also reserves the right to deliver, in case of especial manufacture, either 10% more or less of the object quantity of every order, according to the current availability.
    5. Should the Client incur delays in the agreed payments or cease their activities, FLOWWAY has the right to suspend, either provisionally or definitively, or even cancel, at their own discretion, the pending orders at the time, as well as block the account and/or the supply of materials. In this case, FLOWWAY cannot demand the Client make the late payments, or request additional compensations for the suspension or cancellation of the supply or execution of the agreed services.
  6. TRANSPORT.
    1. Except if the Client has expressly agreed to the contrary, all goods will be submitted to the INCOTERMS EX WORKS, and, therefore, will travel at the Client’s own risk. FLOWWAY is not responsible for any risks of damage or loss of the goods.
    2. Products must be collected in up to 7 days from the time the Client is informed they are available for collection at FLOWWAY’s facilities. FLOWWAY can charge the Client for any storage and additional expenses in case the products are not collected in the aforementioned time window.
      Further more, if the Client has not collected the requested products from FLOWWAY’s warehouses and/or facilities 21 days after being notified of their availability, FLOWWAY can demand the fulfilment or finalization of the supply contract, in agreement with general condition 13 in the present Conditions.
      All damages and imperfections that may occur to the products from the moment they are made available for collection, will be the responsibility of the Client themselves.
    3. All of FLOWWAY’s products are delivered to the hauler after a thorough packaging and quality check, therefore the Client must inspect the quantity and quality of the products at the time of their delivery. In the case that, at the time of the delivery, the Client observes any damages or imperfections, in quantity or quality, in the packaging or the product, they must immediately notify FLOWWAY, by stating the damages in the respective dispatch note or by direct communication with FLOWWAY in up to 4 days after the delivery.
  7. PRICES.
    1. The Client can, at any given moment, request from FLOWWAY the price of the products or services they are interested in. These prices will be valid only during the time window that FLOWWAY indicates in their communications with the Client. If no time period is explicitly mentioned, it is understood that it will be of 15 days.
    2. The invoiced price will be, in all cases, the valid price at the time of the formalization of the order by the Client and its acceptance by FLOWWAY.
    3. The prices indicated to the Client will always be expressed in INR unless specified and will not include GST, fees, transport costs, certificates or other concepts. Consequently, the current taxes and/or fees at the time of the sale, as well as transport costs and any other appropriate concepts, must be added to the price of the acquired products.
    4. Price rates can be modified at any given time by FLOWWAY, without these changes affecting the prices already agreed upon in the current contracts with their Clients.
    5. If prices are modified during manufacturing by fluctuations in the raw materials or any other causes alien to FLOWWAY, the Client will be notified and obliged to assume the rise in price.
      Once the price modification in the order has been notified by FLOWWAY, the Client will have 15 days, from the time of the communication, to state their discomfort, after which the modifications will be considered validly accepted by the Client to all effects.
      In case the price increase is not accepted, FLOWWAY will evaluate the work done until that moment under the pertinent costs and emit the correspondent invoice to the Client, which They must pay in up to 30 days after its reception. Once the bill has been settled, the Client has 30 days to collect the material manufactured. When these 30 days pass, FLOWWAY is free to use the material; the Client will have no right to demand compensation for this concept.
    6. The prices of FLOWWAY’s products refer to units. In the case that packaged products containing more than one unit, the minimum for sale is one package, and it will be expressly indicated whether the price corresponds to the ensemble or not.
    7. Any information relative to article prices published on any platform (catalogues, fares, web shops, etc.) will not be considered an offer. In the case that there are discrepancies between prices, the price of the offer or order accepted by the Client will always take precedence.
  8. PAYMENT CONDITIONS.
    1. Terms are net 30 days, FCA Seller’s facility, unless expressly provided to the contrary on the accompanying quotation. Any amount not timely paid shall bear late charge of one and one-half percent (1.5%) for each month or fraction of a month computed on the outstanding balance until paid in full: provided, however, that such late charges shall not exceed the maximum amount allowed by the law.
  9. RETURNS AND RESALE.
    1. FLOWWAY will not accept returns of any products or services after they have been contently accepted by the Client or made available to Them.
    2. Exceptionally, FLOWWAY will accept returns of standard products as long as each and every one of the following conditions is met:
      • That there is a request for a return by the Client and FLOWWAY accepts it in writing.
      • That the product returned is brought to the original FLOWWAY warehouse by the Client in up to 7 days after delivery.
      • That the returned products are in the original packaging, materials unused and in good condition, and accompanied by a copy of the receipt.
      • That FLOWWAY’s Department of Reception and Department of Control and Quality express their conformity with the products returned.
      • That the Client covers all the expenses caused by the return, including managing costs,in agreement to what condition 4.2 stipulates, as well as any damage or harm that may have been caused to FLOWWAY as a result.
    3. In any case, FLOWWAY reserves the right to decline returns, especially if the flaws in condition have occurred due to faults in storage, preservation, transport or handling.
    4. Returns travel at the Client’s own risk, unless the return occurs because of an error or cause for which FLOWWAY can be held responsible, in which case a written acceptance is required.
    5. Under no circumstances will especial manufactures, machining articles, or any other non- standard products will be accepted for return.
    6. Resale Clients are responsible for their relationship with the final recipient, and They cannot transfer to FLOWWAY any responsibility derived from events following the delivery of the product, except in those situations described expressly by Law.
  10. GUARANTEES.
    1. All claims regarding the contents of the delivery receipt or the acquired products or services must be addressed in writing to FLOWWAY in up to 4 days after the delivery.
    2. The guarantee of all products manufactured by FLOWWAY is of ONE (1) YEAR starting from the date they are made available to the Client. This guarantee is limited to the replacement of a defective product by another of the same characteristics, or, if possible, its repair, at FLOWWAY’s discretion. Other damages or imperfections are excluded from the guarantee, in agreement to general condition 14 of the present Conditions.
      Nevertheless, in the case of products manufactured by third parties, the regulations applied will be those defined by the manufacturers, who will be the ones to decide whether to repair or to replace the defective product.
    3. In order for the replacement of any product to be accepted, FLOWWAY’s Technical Department and Department of Control and Quality must express their conformity before starting communication with the pertinent manufacturer.
    4. FLOWWAY is not responsible for returns that originate from incorrect product selections, defects caused by the normal wear of the product and/or deficient assemblies.
    5. FLOWWAY will not accept claims that derive from damages caused by the Client and/or their employees, transport or third parties handling of the product; nor from a negligent or abusive use of the product by the Client.
    6. The content of FLOWWAY’s catalogues (technical specifications, drawings, etc.) is merely informative and does not generate any compromise or contract whatsoever with the Client.
  11. REATMENT OF PACKAGING AND WASTE.
    1. To the regarding Packaging and Packaging Waste; it is explicitly stated that in all trading operations or transmission of FLOWWAY’s Products, the individual responsible for the handling of the packaging waste or the used package for its correct environmental management, will be the final recipient.
  12. FORCE MAJEURE.
    1. FLOWWAY can suspend or delay the delivery of products in case of Force Majeure causes. The delay can be as long as it is reasonably required by the circumstances without FLOWWAY being held responsible.
    2. Force Majeure is to be understood as any cause or circumstance beyond FLOWWAY’s reasonable control, including, for example, but not exclusively: supplier, transport and services strikes, errors in third parties’ supplies, faults in transport systems, natural catastrophes, floods, rough weather, disturbances, general strikes, labour conflicts, stops in FLOWWAY’s or any of their subcontractors’ internal staff, foul play, acts, omissions, or any other kind of intervention by the government or one of its agencies, accidental stops in FLOWWAY’s workshops because of machinery breakdowns or any other causes for which FLOWWAY cannot be held responsible, as well as other Force Majeure causes contemplated in the current legislations that may affect, either directly or indirectly, FLOWWAY’s activities.
    3. In case of Force Majeure, FLOWWAY is committed to notify the Client as soon as possible about the existence of the Force Majeure cause, as well as its foreseeable extent. By the same token, the ending of the cause will also be notified, stating the amount of time it will take FLOWWAY to resume all obligations suspended on account of the aforementioned Force Majeure.
  13. FINALIZATION OF CONTRACT.
    1. Should the Client fail to meet any of their obligations, especially should they fail to partially or completely pay FLOWWAY’s invoices, FLOWWAY can, after a 3 days notice written communication, either demand the fulfilment of the contract and the payment of the total in- debt sums, with the agreed delay interests and bank and administrative expenses generated; or consider the matter resolved by requesting the Client return the goods and cover all transport costs, as well as pay for any damages or harms that may have ensued, and a compensation equal to 10% of the total price of the unpaid order, which is expressly agreed as a concept of the penal clause.
    2. Additionally, the Client is entitled to finalize the contract should FLOWWAY fail to meet any of the obligations they assumed contractually.
  14. LIMITATION OF RESPONSIBILITY.
    1. FLOWWAY, their agents, employees, subcontractors and suppliers have responsibilities regarding claims deriving from the fulfilment, or lack thereof, of their contractual obligations. However, this responsibility will not be, altogether, greater than the basic contractual price and will not include, in any case, damages occurring from redundant profit, loss of income, production or use, capital expenses, inactivity costs, delays and claims by the Buyer’s costumers, substitutive energy expenses, loss of foreseeable savings, increase in exploitation costs or any other especial damages, either indirect or consequential, or losses of any kind.
    2. The limitation of responsibility contained in the present clause will prevail over any other that is contained in other contractual documents and is contradictory or incongruous, except if it further restricts FLOWWAY’s responsibility.
    3. In the case any product has been manufactured by FLOWWAY following designs, blueprints or specifications indicated by the Client, FLOWWAY does not take responsibility if said products do not get authorized or do not fulfil their purpose or the use the Client had projected.
    4. In any case, FLOWWAY does not take responsibility nor guarantees the electrical material that the products requested by the Client require.
  15. INTELLECTUAL AND INDUSTRIAL PROPERTY.
    1. All designs, blueprints, sketches, ideas, drawings, software, data and any other files that may constitute the object of the order are exclusive property of FLOWWAY, who expressly reserves the intellectual and industrial property rights. Consequently, the Client cannot use or access them, nor can they make them accessible to third parties without the express written consent of FLOWWAY.
  16. APPLICABLE LEGISLATION, COMPETENCE AND JURISDICTION.
    1. This agreement is subject to the laws of india. If any terms or conditions here of fount to be illegal or unenforceable, the balance hereof shall remain in full force an effect. Both seller and buyer acknowledged and agreed that the UN convention on contracts for the international sale of goods shall not apply to this order.